Beko WMA520S Washing Machine Spares
The easiest way to find the Beko washing machine spares you need is to use your washing machine model number. If you are not sure how to locate this then try our handy Model Finder Guide.
More information
When the drum in a washing machine does not turn during a cycle this is usually due to a worn or broken belt. Replacing the belt with a new one should resolve the issue. If the belt is in good condition it may have simply slipped off, in which case it needs to be repositioned.
If the WMA520S washing machine is leaking it is a common symptom of a faulty door seal which, if torn or worn down, will allow water through. While replacing the door seal should rectify the leak, the issue could alternatively arise due to the pump or the hoses.
Noise from the WMA520S washing machine can originate from several sources, such as loose components or if the machine is not being solidly supported by all four legs. More likely, however, are the drum bearings being worn and these should be repaired quickly as the fault can affect other parts in the machine. Indicators of worn bearings could be a loose drum or rusting at the back of the machine.
Important Note: The model you have selected has more than one serial number which may mean that some parts are serial number specific and therefore may appear multiple times in these search results. If you have the serial number available then please select it from the list below to ensure you get the right part first time.
Select your Serial Number:
Beko WMA520S: 37 - 48 of 214
Beko WMA520S Bearing Seal
Genuine spare part
If your appliance is no longer performing at full capacity help bring it back to its best with this quality bearing and seal kit. The bearings... More information
£12.72
Beko WMA520S Hose Clamp
Genuine spare part
Over time hose clamps can become worn and weak, and if this happens then they will be less reliable to depend upon to keep the hose in your appliance... More information
£4.50
Beko WMA520S Drain Hose Holder
Genuine spare part
If you are noticing your drain hose holder is not operating the way it used to. Fit this part and you could get yourself problem free with no further... More information
£4.50
Beko WMA520S Pulley Bolt
Genuine spare part
If your Beko Washing Machine isn't spinning, then there is likely to be a problem with the drum's drive system. If the bolt that holds the drive pulley... More information
£7.34
Beko WMA520S Drain Pump Assembly: 2840940400
Genuine spare part
Type: 2840940400 Includes Filter Watts: 25w If you notice that your washing machine isn't draining, filtering or cooling its water correctly, then... More information
£50.41
Beko WMA520S Sump Hose
Genuine spare part
Is there a puddle of water on your kitchen floor? If your washing machine is leaking, the culprit could be a split Hose. Your washing machine is designed... More information
£16.05
Beko WMA520S Shock Absorber
Genuine spare part
Over time, the dampers can become stretched or even damaged from the constant tension they face during the washing cycles. If the shock absorber breaks,... More information
£22.70
£7.34
Beko WMA520S Door Assembly
Genuine spare part
Colour: White If you have damaged the door on your washing machine, and it has stopped you from being able to continue using the appliance, this replacement... More information
£70.37
£4.50
Beko WMA520S Outer Door Frame - White
Genuine spare part
If you have damaged the outer door frame on your washing machine, and it has stopped you from being able to continue using the appliance, this replacement... More information
£57.07
Beko WMA520S Mains Filter
Genuine consumable
Regular Interference Filter replacement helps maintain the performance of your washing machine. The Interference Filter is an important part... More information
£24.92