
Beko WM6152W Washing Machine Spares
The easiest way to find the Beko washing machine spares you need is to use your washing machine model number. If you are not sure how to locate this then try our handy Model Finder Guide.
More information
When the drum in a washing machine does not turn during a cycle this is usually due to a worn or broken belt. Replacing the belt with a new one should resolve the issue. If the belt is in good condition it may have simply slipped off, in which case it needs to be repositioned.
If the WM6152W washing machine is leaking it is a common symptom of a faulty door seal which, if torn or worn down, will allow water through. While replacing the door seal should rectify the leak, the issue could alternatively arise due to the pump or the hoses.
Noise from the WM6152W washing machine can originate from several sources, such as loose components or if the machine is not being solidly supported by all four legs. More likely, however, are the drum bearings being worn and these should be repaired quickly as the fault can affect other parts in the machine. Indicators of worn bearings could be a loose drum or rusting at the back of the machine.
Important Note: The model you have selected has more than one serial number which may mean that some parts are serial number specific and therefore may appear multiple times in these search results. If you have the serial number available then please select it from the list below to ensure you get the right part first time.
Select your Serial Number:
View an exploded diagram of your appliance
Make sure the part you're looking at is the part you need.
Beko WM6152W (7130081700) : 13 - 24 of 180
Beko WM6152W Door Interlock Screw
Genuine spare part
Keep the door interlock mechanism on your appliance secure with this genuine replacement Screw. Please check model fit list to ensure this part is... More information
£4.50
Beko WM6152W Cold Water Double Solenoid Inlet Valve : 180Deg. With 12 Bore Outlets
Genuine spare part
Angle: 180 Type: 2 Way Connector: Tag Also Known As: Water Valve, Fill Valve, Inlet Valve, Electric Valve Bore: 12 220-240 volts If water isn't entering... More information
£36.00
Beko WM6152W Dispenser Drawer
Genuine spare part
If your washing machine isn't dispensing its washing product correctly, then the dispenser drawer may require replacing. Use this genuine replacement... More information
£13.83
Beko WM6152W Shock Absorber Pin
Genuine spare part
Help secure the damper on your washing machine if the hinge pin has become damaged with this quality replacement – get your washing machine... More information
£4.50
Beko WM6152W Soap Dispenser Siphon
Genuine spare part
Correctly siphon the water away from the dispenser unit in your washing machine with this genuine replacement Siphon! This replacement Siphon is ideal... More information
£8.48
Beko WM6152W Push Button On/Off Switch : 4TAG
Genuine spare part
If your washing machine's On/Off Switch is worn, stiff or loose, then it may require replacing. Use this replacement On/Off Switch to ensure accurate... More information
£12.72
Beko WM6152W Hose
Genuine spare part
Is there a puddle of water on your kitchen floor? If your washing machine is leaking, the culprit could be a split Hose. Your washing machine is designed... More information
£14.94
Beko WM6152W Tub Inlet Hose
Genuine spare part
The fill hose in your washing machine is for connecting your appliance to the water supply. If you have any issues with your appliances water supply,... More information
£12.72
Beko WM6152W Stopper
Genuine spare part
This washing machine stopper fits at the end of the drain hose, so if your existing stopper is damaged or faulty, use this genuine Beko replacement... More information
£4.50
£4.50
Beko WM6152W Thermostat Temperature Sensor NTC : ELTH Type 2790092 2804980200 8200 4.8K
Genuine spare part
Also Known As: Toc, Cut out Keep your appliance at the correct working temperature with this replacement thermostat If you find that the water temperature... More information
£14.94
Beko WM6152W Hose Holder
Genuine spare part
If you are noticing your hose holder is not operating the way it used to. Fit this part and you could get yourself problem free with no further problem.... More information
£4.50