Beko WM5140W Washing Machine Element
The easiest way to find the Beko washing machine Element you need is to use your washing machine model number. If you are not sure how to locate this then try our handy Model Finder Guide.
More information
When the drum in a washing machine does not turn during a cycle this is usually due to a worn or broken belt. Replacing the belt with a new one should resolve the issue. If the belt is in good condition it may have simply slipped off, in which case it needs to be repositioned.
If the WM5140W washing machine is leaking it is a common symptom of a faulty door seal which, if torn or worn down, will allow water through. While replacing the door seal should rectify the leak, the issue could alternatively arise due to the pump or the hoses.
Noise from the WM5140W washing machine can originate from several sources, such as loose components or if the machine is not being solidly supported by all four legs. More likely, however, are the drum bearings being worn and these should be repaired quickly as the fault can affect other parts in the machine. Indicators of worn bearings could be a loose drum or rusting at the back of the machine.
Washing Machine Element: 1 - 6 of 6
Beko WM5140W Element Heater - 1950W With NTC
Genuine spare part
Also Known As: Heater Element 1950 watts 230 volts Contains NTC Sensor Thermistor Single Tag Type Earth Tag Full length of element: 275mm Length of... More information
£19.95
Beko WM5140W Wash Element 1950W With NTC
Genuine spare part
1950 watts 230 volts Contains NTC Sensor Thermistor Single Tag Type Earth Tag Full length of element: 275mm Length of element to bracket: 250mm Width... More information
£19.95
Beko WM5140W Heater Element 1950W
Genuine spare part
1950 watts 230 volts Contains NTC Sensor Thermistor Single Tag Type Earth Tag Full length of element: 275mm Length of element to bracket: 247mm Width... More information
£43.76
£27.13
Beko WM5140W Heating Element
Genuine spare part
This Heating Element heats water to the washing temperature selected. If the water in your appliance doesn’t reach the desired temperature,... More information