Beko WM5140S Washing Machine Spares
The easiest way to find the Beko washing machine spares you need is to use your washing machine model number. If you are not sure how to locate this then try our handy Model Finder Guide.
More information
When the drum in a washing machine does not turn during a cycle this is usually due to a worn or broken belt. Replacing the belt with a new one should resolve the issue. If the belt is in good condition it may have simply slipped off, in which case it needs to be repositioned.
If the WM5140S washing machine is leaking it is a common symptom of a faulty door seal which, if torn or worn down, will allow water through. While replacing the door seal should rectify the leak, the issue could alternatively arise due to the pump or the hoses.
Noise from the WM5140S washing machine can originate from several sources, such as loose components or if the machine is not being solidly supported by all four legs. More likely, however, are the drum bearings being worn and these should be repaired quickly as the fault can affect other parts in the machine. Indicators of worn bearings could be a loose drum or rusting at the back of the machine.
Important Note: The model you have selected has more than one serial number which may mean that some parts are serial number specific and therefore may appear multiple times in these search results. If you have the serial number available then please select it from the list below to ensure you get the right part first time.
Select your Serial Number:
View an exploded diagram of your appliance
Make sure the part you're looking at is the part you need.
Beko WM5140S (7151681100) : 13 - 24 of 169
Beko WM5140S L93MF7 Carbon Brushes (Pair)
Genuine spare part
Please Note: It is always advisable to change both carbon brushes at the same time. Type: L93MF7 Includes 2 x carbon brushes Washing machines have... More information
£26.03
Pack of 2
Beko WM5140S Carbon Brush (Pair) : L24MF7
Genuine spare part
L24MF7 39mm Pack of 2 If the motor in your washing machine is stopping and starting or the motor has stopped altogether, then you may have a fault... More information
£29.35
Pack of 2
Beko WM5140S Door Seal
Genuine spare part
Top Diameter Outer: 320mm Top Diameter Inner: 280mm Bottom Diameter Outer: 360mm Bottom Diameter Inner: 290mm The washing machine door seal, otherwise... More information
£25.96
Beko WM5140S Water Inlet Hose Assembly
Genuine spare part
If you notice leakages from the base of your machine, or that water isn't entering your washing machine properly, there is likely to be a problem... More information
£17.16
Beko WM5140S PCB DC Module
Genuine spare part
If your washing machine is no longer operating at full capacity and you are finding the settings are no longer responding, then you may have a fault... More information
£27.50
Beko WM5140S Dispenser Drawer
Genuine spare part
If your washing machine isn't dispensing its washing product correctly, then the dispenser drawer may require replacing. Use this genuine replacement... More information
£13.83
Beko WM5140S Door Interlock Screw
Genuine spare part
Keep the door interlock mechanism on your appliance secure with this genuine replacement Screw. Please check model fit list to ensure this part is... More information
£4.50
Beko WM5140S Porthole Door Glass
Genuine spare part
The smallest of cracks on your washing machine door glass could cause the machine to leak when on a program. Replacing the glass in the door with... More information
£22.70
Beko WM5140S Shock Absorber Pin
Genuine spare part
This genuine replacement Pin fits on your washing machine's shock absorber and is ideal if your existing pin is worn or damaged. Please check model... More information
£4.50
Beko WM5140S Cold Water Double Solenoid Inlet Valve : 180Deg. With 12 Bore Outlets
Genuine spare part
Angle: 180 Type: 2 Way Connector: Tag Also Known As: Water Valve, Fill Valve, Inlet Valve, Electric Valve Bore: 12 220-240 volts If water isn't entering... More information
£36.00
£36.00
Beko WM5140S Heater Element 1950W
Genuine spare part
1950 watts 230 volts Contains NTC Sensor Thermistor Single Tag Type Earth Tag Full length of element: 275mm Length of element to bracket: 247mm Width... More information
£31.57
