Beko WA-6108G Washing Machine Spares
The easiest way to find the Beko washing machine spares you need is to use your washing machine model number. If you are not sure how to locate this then try our handy Model Finder Guide.
More information
When the drum in a washing machine does not turn during a cycle this is usually due to a worn or broken belt. Replacing the belt with a new one should resolve the issue. If the belt is in good condition it may have simply slipped off, in which case it needs to be repositioned.
If the WA-6108G washing machine is leaking it is a common symptom of a faulty door seal which, if torn or worn down, will allow water through. While replacing the door seal should rectify the leak, the issue could alternatively arise due to the pump or the hoses.
Noise from the WA-6108G washing machine can originate from several sources, such as loose components or if the machine is not being solidly supported by all four legs. More likely, however, are the drum bearings being worn and these should be repaired quickly as the fault can affect other parts in the machine. Indicators of worn bearings could be a loose drum or rusting at the back of the machine.
Important Note: The model you have selected has more than one serial number which may mean that some parts are serial number specific and therefore may appear multiple times in these search results. If you have the serial number available then please select it from the list below to ensure you get the right part first time.
Select your Serial Number:
Beko WA-6108G: 1 - 12 of 108
Beko WA-6108G Door Interlock Screw
Genuine spare part
Keep the door interlock mechanism on your appliance secure with this genuine replacement Screw. Please check model fit list to ensure this part is... More information
£4.50
Beko WA-6108G Push Button On/Off Switch : 4TAG
Genuine spare part
If your washing machine's On/Off Switch is worn, stiff or loose, then it may require replacing. Use this replacement On/Off Switch to ensure accurate... More information
£12.72
Beko WA-6108G Carbon Brush : Type: L13MF7
Genuine spare part
Type: L13MF7 Black & Red Supplied as a pair of carbon brushes If your washing machine motor is no longer performing at full capacity, then it may... More information
£24.92
Pack of 2Beko WA-6108G Hose Holder
Genuine spare part
If you are noticing your hose holder is not operating the way it used to. Fit this part and you could get yourself problem free with no further problem.... More information
£4.50
£4.50
Beko WA-6108G Hose Clamp - Approx 35mm
Genuine spare part
Diameter: Approx 35 (mm) Over time hose clamps can become worn and weak, and if this happens then they will be less reliable to depend upon to keep... More information
£4.50
Beko WA-6108G Hose Clamp - 38.8mm
Genuine spare part
Diameter: 38.8 (mm) Over time hose clamps can become worn and weak, and if this happens then they will be less reliable to depend upon to keep the... More information
£4.50
Beko WA-6108G Pulley Bolt
Genuine spare part
If your Beko Washing Machine isn't spinning, then there is likely to be a problem with the drum's drive system. If the bolt that holds the drive pulley... More information
£7.34
Beko WA-6108G Poly-Vee Drive Belt - 1276J4PJE
Genuine spare part
Length 1276 mm Section J Ribs: 4 Elasticity: PJE Type: Poly-Vee If the poly-vee drive belt in your washing machine has snapped, the motor will no... More information
£16.05
Beko WA-6108G Hose Clamp
Genuine spare part
Over time hose clamps can become worn and weak, and if this happens then they will be less reliable to depend upon to keep the hose in your appliance... More information
£4.50
Beko WA-6108G Drain Hose Holder
Genuine spare part
If you are noticing your drain hose holder is not operating the way it used to. Fit this part and you could get yourself problem free with no further... More information
£4.50
£17.16