Beko WA-1450 Washing Machine Bearing
The easiest way to find the Beko washing machine Bearing you need is to use your washing machine model number. If you are not sure how to locate this then try our handy Model Finder Guide.
More information
When the drum in a washing machine does not turn during a cycle this is usually due to a worn or broken belt. Replacing the belt with a new one should resolve the issue. If the belt is in good condition it may have simply slipped off, in which case it needs to be repositioned.
If the WA-1450 washing machine is leaking it is a common symptom of a faulty door seal which, if torn or worn down, will allow water through. While replacing the door seal should rectify the leak, the issue could alternatively arise due to the pump or the hoses.
Noise from the WA-1450 washing machine can originate from several sources, such as loose components or if the machine is not being solidly supported by all four legs. More likely, however, are the drum bearings being worn and these should be repaired quickly as the fault can affect other parts in the machine. Indicators of worn bearings could be a loose drum or rusting at the back of the machine.
Washing Machine Bearing: 0 - 0 of 0