Beko WMA520S Washing Machine Element
The easiest way to find the Beko washing machine Element you need is to use your washing machine model number. If you are not sure how to locate this then try our handy Model Finder Guide.
More information
When the drum in a washing machine does not turn during a cycle this is usually due to a worn or broken belt. Replacing the belt with a new one should resolve the issue. If the belt is in good condition it may have simply slipped off, in which case it needs to be repositioned.
If the WMA520S washing machine is leaking it is a common symptom of a faulty door seal which, if torn or worn down, will allow water through. While replacing the door seal should rectify the leak, the issue could alternatively arise due to the pump or the hoses.
Noise from the WMA520S washing machine can originate from several sources, such as loose components or if the machine is not being solidly supported by all four legs. More likely, however, are the drum bearings being worn and these should be repaired quickly as the fault can affect other parts in the machine. Indicators of worn bearings could be a loose drum or rusting at the back of the machine.
Important Note: The model you have selected has more than one serial number which may mean that some parts are serial number specific and therefore may appear multiple times in these search results. If you have the serial number available then please select it from the list below to ensure you get the right part first time.
Select your Serial Number:
Washing Machine Element: 1 - 3 of 3
Beko WMA520S Wash Element 1900W & NTC
Genuine spare part
Wattage: 1900W 230 volts Contains NTC Sensor Thermistor Single Tag Type Earth Tag Full Length of element: 290mm Length of element to bracket: 260mm... More information
£36.00
£24.92
Beko WMA520S Element Support Bracket
Genuine spare part
If you are noticing your element's support bracket is not operating the way it used to. Fit this part and you could get yourself problem free with... More information
£7.34