Beko Tumble Dryer Vent Hose
The easiest way to find the Beko tumble dryer Vent Hose you need is to use your tumble dryer model number. If you are not sure how to locate this then try our handy Model Finder Guide.
More information
A broken or worn drive belt is generally the cause of a drum that is failing to turn when the motor is functional. Attempting to turn the drum by hand will establish whether the belt is in good condition - if the drum is difficult to turn then the belt is working, but if the drum turns with little resistance the belt needs to be replaced. A belt in working condition should be taut around the drum, so bear this mind when fitting a new one.
If an issue with temperature regulation is affecting the dryer's performance, the thermostat is likely to be faulty - replacing this component should resolve the problem.
Fitting a new heating element should usually fix the problem of the dryer not heating up either enough or at all. While this is an easy repair to carry out it is not the only solution, as there may also be a fault with the thermal cut-out switch, which needs replacing.
Narrow by Tumble Dryer Model Number
Filter the results by model number to make sure you get the part you need.
Choose your model numberTumble Dryer Vent Hose: 1 - 2 of 2
Beko 1.8m Vent Hose (3.9")
Genuine spare part
Length: 1.8m Diameter: 3.9" If your tumble dryer is in a kitchen or utility room and it is not vented to the outside, it will cause condensation build... More information
£17.16
Beko Vent Tube Adaptor
Genuine spare part
If your Tumble Dryer's Vent Hose Adaptor is coming loose from the dryer's orifice, use this genuine Vent Hose Adaptor to restore a secure connection,... More information
£7.34
