Beko DRCS68S Tumble Dryer Element
The easiest way to find the Beko tumble dryer Element you need is to use your tumble dryer model number. If you are not sure how to locate this then try our handy Model Finder Guide.
More information
A broken or worn drive belt is generally the cause of a drum that is failing to turn when the motor is functional. Attempting to turn the drum by hand will establish whether the belt is in good condition - if the drum is difficult to turn then the belt is working, but if the drum turns with little resistance the belt needs to be replaced. A belt in working condition should be taut around the drum, so bear this mind when fitting a new one.
If an issue with temperature regulation is affecting the DRCS68S dryer's performance, the thermostat is likely to be faulty - replacing this component should resolve the problem.
Fitting a new heating element should usually fix the problem of the dryer not heating up either enough or at all. While this is an easy repair to carry out it is not the only solution, as there may also be a fault with the thermal cut-out switch, which needs replacing.
Important Note: The model you have selected has more than one serial number which may mean that some parts are serial number specific and therefore may appear multiple times in these search results. If you have the serial number available then please select it from the list below to ensure you get the right part first time.
Select your Serial Number:
Tumble Dryer Element: 1 - 5 of 5
Beko DRCS68S Dryer Heater Element : 2957500800
Genuine spare part
Your tumble dryer requires a heater element to heat the air inside the drum. If your tumble dryer is no longer heating up and your clothes are coming... More information
£59.28
£42.65
£36.00
£5.64
£31.57
