Beko DRCS68S Tumble Dryer Spares
The easiest way to find the Beko tumble dryer spares you need is to use your tumble dryer model number. If you are not sure how to locate this then try our handy Model Finder Guide.
More information
A broken or worn drive belt is generally the cause of a drum that is failing to turn when the motor is functional. Attempting to turn the drum by hand will establish whether the belt is in good condition - if the drum is difficult to turn then the belt is working, but if the drum turns with little resistance the belt needs to be replaced. A belt in working condition should be taut around the drum, so bear this mind when fitting a new one.
If an issue with temperature regulation is affecting the DRCS68S dryer's performance, the thermostat is likely to be faulty - replacing this component should resolve the problem.
Fitting a new heating element should usually fix the problem of the dryer not heating up either enough or at all. While this is an easy repair to carry out it is not the only solution, as there may also be a fault with the thermal cut-out switch, which needs replacing.
Important Note: The model you have selected has more than one serial number which may mean that some parts are serial number specific and therefore may appear multiple times in these search results. If you have the serial number available then please select it from the list below to ensure you get the right part first time.
Select your Serial Number:
View an exploded diagram of your appliance
Make sure the part you're looking at is the part you need.
Beko DRCS68S (7181981100) : 49 - 60 of 168
Beko DRCS68S Condenser Fan
Genuine spare part
If you are noticing your condenser fan is not operating the way it used to. Fit this part and you could get yourself problem free with no further... More information
£17.16
Beko DRCS68S Door Hook
Genuine spare part
If you are finding that opening and closing the door to your tumble dryer is not as smooth a process as it once was, it could be due to faulty door... More information
£7.34
Beko DRCS68S Main PCB : Karel 2963219000 Label On PCB 2963281701 / Label On Housing
Genuine spare part
This genuine replacement Main PCB sits behind your tumble dryers control panel fascia. If the control unit for your tumble dryer has become faulty,... More information
£84.78
Beko DRCS68S Front Sealing Felt
Genuine spare part
For Model Number - DRCS68W & DRCS68S Use The Folling Parts Serial Number Before 10-Xxxxxx-10 Use The Following Drum 2958000300 - Drum Bearing 2966000300... More information
£19.37
Beko DRCS68S Motor
Genuine spare part
Includes Fan Blades 220 - 240 volts 90 watts 50Hz 12 Ridges Rotating Arm 1: 35mm Rotating Arm 2: 170mm If your tumble dryer is not spinning as it... More information
£111.38
£4.50
Beko DRCS68S Adjustable Foot
Genuine spare part
If your tumble dryer is no longer stable to the floor making drying clothes a nightmare for you and the floor, then you may have a damaged foot that... More information
£5.64
£7.34
Beko DRCS68S Fixed Filter Assy. (Left)
Genuine consumable
If your tumble dryer isn't removing lint and fluff from your clothes correctly, there may be a problem with the fluff filter. Use this replacement... More information
£11.32
£5.64
Beko DRCS68S Timer Control Knob
Genuine spare part
Have you misplaced your control knob or is it broken? Then use this genuine replacement control knob to regain accurate control over your tumble dryer... More information
£7.34
Beko DRCS68S Lamp Seal
Genuine spare part
The lamp requires a seal to help protect the bulb and the internal workings for the lamp, if the seal has perished a new one will be required. This... More information
£8.48
