Beko AB910S Fridge/Freezer Handle
The easiest way to find the Beko Handle you need is to use your fridge freezer model number. If you are not sure how to locate this then try our handy Model Finder Guide.
Important Safety Notice >>
More information
When the fridge is freezing its contents and always running it is usually the sign of a fault with the thermostat. This is a common issue but the thermostat is complicated to repair, so replacing the component is more suitable.
If odorous water is accumulating at the bottom of the AB910S fridge the drain hole into the evaporator tray may have become blocked with food or debris. Clearing the blockage should solve the problem by allowing the condensation inside the fridge to flow freely into the tray.
A fridge can sometimes become much noisier than usual, and this may be attributed to a faulty compressor, defrost timer or condenser fan motor, in addition to several other components. The part will need to be replaced, with the exception of the condenser fan which may be noisy due to an amassing of debris on the fan blades; cleaning this off may avoid the necessity of a replacement.
Important Note: The model you have selected has more than one serial number which may mean that some parts are serial number specific and therefore may appear multiple times in these search results. If you have the serial number available then please select it from the list below to ensure you get the right part first time.
Select your Serial Number:
Fridge / Freezer Handle: 1 - 4 of 4
Beko AB910S Fridge Freezer Door Handle Screw
Genuine spare part
Type: M5x25 If a handle on your fridge freezer door is worn, stiff to move or loosely fitting, then the fixing screw may require replacing. Use this... More information
£4.50
Beko AB910S Door Handle
Genuine spare part
Is the handle on your fridge or freezer door damaged? If you are finding it hard to open or close the door because of this problem, this replacement... More information
£36.00
£14.94
£14.94
