![Beko GIN1580X Dishwasher Solenoid Valve](/images/pubs/351/61208.jpg)
Beko GIN1580X Dishwasher Solenoid Valve
The easiest way to find the Beko dishwasher Solenoid Valve you need is to use your dishwasher model number. If you are not sure how to locate this then try our handy Model Finder Guide.
More information
A leaking dishwasher is usually a sign of a worn door gasket or door seal, which can deteriorate over time. Checking the seal for hardness, cracks or bulges will confirm if it is faulty and necessitating replacement. However, a leakage from your GIN1580X dishwasher could also be the result of a poorly locking door latch, a loose hose clamp or the hose itself being worn.
If the water is not draining from your GIN1580X dishwasher this can often be more complicated to diagnose and it may be more suitable to contact a repair professional. Aside from a blockage in the strainer (which should be removed and cleaned regularly), the fault may lie with the pump, the motor or the solenoid which controls the drain valve.
The dishwasher's contents emerging still wet after a complete cleaning cycle indicates an issue with the drying process; a faulty heating element or thermostat are the most likely causes of this process not functioning satisfactorily.
Replacing the wheels on the basket rack is likely to resolve the issue of the rack not moving freely in and out of the dishwasher. Placing a fully-loaded rack back into the dishwasher with force can damage the wheels, but replacement is quick and simple.
Dishwasher Solenoid Valve: 1 - 2 of 2
Beko GIN1580X Dishwasher Regeneration Solenoid Valve : 15116PC
Genuine spare part
Type: 1 Way Connector: Push 220-240 volts The solenoid valve on your appliance opens when a current is supplied, to allow the appliance to fill with... More information
£16.05
Beko GIN1580X Solenoid Valve
Genuine spare part
If water isn't entering your dishwasher correctly - if the spray arms aren't generating the pressure required to spray water to the dishes in your... More information
£111.38