Beko 3504BLL Dishwasher Solenoid Valve

Find Your Spare Part Clear All

Your model Model

3504BLL

Your part Part

Solenoid Valve
Clear

Refine Selection

Your model Model

3504BLL

Your part Part

Solenoid Valve
Beko 3504BLL Dishwasher Solenoid Valve

Beko 3504BLL Dishwasher Solenoid Valve

Get the Beko dishwasher Solenoid Valve you need to repair your Beko dishwasher. We have an extensive range of genuine Beko dishwasher parts to choose from, so we are sure to have the dishwasher Solenoid Valve you need. All our Beko dishwasher spare parts are competitively-priced and available for Next Day Delivery.

The easiest way to find the Beko dishwasher Solenoid Valve you need is to use your dishwasher model number. If you are not sure how to locate this then try our handy Model Finder Guide.


More information


A leaking dishwasher is usually a sign of a worn door gasket or door seal, which can deteriorate over time. Checking the seal for hardness, cracks or bulges will confirm if it is faulty and necessitating replacement. However, a leakage from your 3504BLL dishwasher could also be the result of a poorly locking door latch, a loose hose clamp or the hose itself being worn.

If the water is not draining from your 3504BLL dishwasher this can often be more complicated to diagnose and it may be more suitable to contact a repair professional. Aside from a blockage in the strainer (which should be removed and cleaned regularly), the fault may lie with the pump, the motor or the solenoid which controls the drain valve.

The dishwasher's contents emerging still wet after a complete cleaning cycle indicates an issue with the drying process; a faulty heating element or thermostat are the most likely causes of this process not functioning satisfactorily.

Replacing the wheels on the basket rack is likely to resolve the issue of the rack not moving freely in and out of the dishwasher. Placing a fully-loaded rack back into the dishwasher with force can damage the wheels, but replacement is quick and simple.

Beko 3504BLL Single Solenoid Inlet Valve : 90Deg. With 12 Bore Outlet

Genuine spare part

Angle: 90 Type: 1 Way Connector: Tag Bore: 12 220-240 volts Also Known As: Water Valve, Fill Valve, Inlet Valve, Electric Valve If water isn't entering... More information

This product is not available to order.

For alternatives click here